COBOL & COBOL II
Q1) Name the divisions in a COBOL program ?.
A1) IDENTIFICATION DIVISION, ENVIRONMENT DIVISION, DATA DIVISION, PROCEDURE DIVISION.
Q2) What are the different data types available in COBOL?
A2) Alpha-numeric (X), alphabetic (A) and numeric (9).
Q3) What does the INITIALIZE verb do? - GS
A3) Alphabetic, Alphanumeric fields & alphanumeric edited items are set to SPACES. Numeric, Numeric edited items set to ZERO. FILLER , OCCURS DEPENDING ON items left untouched.
Q4) What is 77 level used for ?
A4) Elementary level item. Cannot be subdivisions of other items (cannot be qualified), nor can they be subdivided themselves.
Q5) What is 88 level used for ?
A5) For condition names.
Q6) What is level 66 used for ?
A6) For RENAMES clause.
Q7) What does the IS NUMERIC clause establish ?
A7) IS NUMERIC can be used on alphanumeric items, signed numeric & packed decimal items and unsigned numeric & packed decimal items. IS NUMERIC returns TRUE if the item only consists of 0-9. However, if the item being tested is a signed item, then it may contain 0-9, + and - .
Q8) How do you define a table/array in COBOL?
A8) ARRAYS.
05 ARRAY1 PIC X(9) OCCURS 10 TIMES.
05 ARRAY2 PIC X(6) OCCURS 20 TIMES INDEXED BY WS-INDEX.
Q9) Can the OCCURS clause be at the 01 level?
A9) No.
Q10) What is the difference between index and subscript? - GS
A10) Subscript refers to the array occurrence while index is the displacement (in no of bytes) from the beginning of the
array. An index can only be modified using PERFORM, SEARCH & SET. Need to have index for a table in order to
use SEARCH, SEARCH ALL.
Q11) What is the difference between SEARCH and SEARCH ALL? - GS
A11) SEARCH - is a serial search.
SEARCH ALL - is a binary search & the table must be sorted ( ASCENDING/DESCENDING KEY clause to be used & data loaded in this order) before using SEARCH ALL.
Q12) What should be the sorting order for SEARCH ALL? - GS
A12) It can be either ASCENDING or DESCENDING. ASCENDING is default. If you want the search to be done on an
array sorted in descending order, then while defining the array, you should give DESCENDING KEY clause. (You
must load the table in the specified order).
Q13) What is binary search?
A13) Search on a sorted array. Compare the item to be searched with the item at the center. If it matches, fine else repeat the process with the left half or the right half depending on where the item lies.
Q14) My program has an array defined to have 10 items. Due to a bug, I find that even if the program access the
11th item in this array, the program does not abend. What is wrong with it?
A14) Must use compiler option SSRANGE if you want array bounds checking. Default is NOSSRANGE.
Q15) How do you sort in a COBOL program? Give sort file definition, sort statement syntax and meaning. - GS
A15) Syntax: SORT file-1 ON ASCENDING/DESCENDING KEY key.... USING file-2 GIVING file-3.
USING can be substituted by INPUT PROCEDURE IS para-1 THRU para-2
GIVING can be substituted by OUTPUT PROCEDURE IS para-1 THRU para-2.
file-1 is the sort (work) file and must be described using SD entry in FILE SECTION.
file-2 is the input file for the SORT and must be described using an FD entry in FILE SECTION and SELECT
clause in FILE CONTROL.
file-3 is the out file from the SORT and must be described using an FD entry in FILE SECTION and SELECT
clause in FILE CONTROL.
file-1, file-2 & file-3 should not be opened explicitly.
INPUT PROCEDURE is executed before the sort and records must be RELEASEd to the sort work file from the input procedure.
OUTPUT PROCEDURE is executed after all records have been sorted. Records from the sort work file must be RETURNed one at a time to the output procedure.
Q16) How do you define a sort file in JCL that runs the COBOL program?
A16) Use the SORTWK01, SORTWK02,..... dd names in the step. Number of sort datasets depends on the volume of data
being sorted, but a minimum of 3 is required.
Q17) What is the difference between performing a SECTION and a PARAGRAPH? - GS
A17) Performing a SECTION will cause all the paragraphs that are part of the section, to be performed.
Performing a PARAGRAPH will cause only that paragraph to be performed.
Q18) What is the use of EVALUATE statement? - GS
A18) Evaluate is like a case statement and can be used to replace nested Ifs. The difference between EVALUATE and
case is that no 'break' is required for EVALUATE i.e. control comes out of the EVALUATE as soon as one match is
made.
Q19) What are the different forms of EVALUATE statement?
A19)
EVALUATE EVALUATE SQLCODE ALSO FILE-STATUS
WHEN A=B AND C=D WHEN 100 ALSO '00'
imperative stmt imperative stmt
WHEN (D+X)/Y = 4 WHEN -305 ALSO '32'
imperative stmt imperative stmt
WHEN OTHER WHEN OTHER
imperative stmt imperative stmt
END-EVALUATE END-EVALUATE
EVALUATE SQLCODE ALSO A=B EVALUATE SQLCODE ALSO TRUE
WHEN 100 ALSO TRUE WHEN 100 ALSO A=B
imperative stmt imperative stmt
WHEN -305 ALSO FALSE WHEN -305 ALSO (A/C=4)
imperative stmt imperative stmt
END-EVALUATE END-EVALUATE
Q20) How do you come out of an EVALUATE statement? - GS
A20) After the execution of one of the when clauses, the control is automatically passed on to the next sentence after the
EVALUATE statement. There is no need of any extra code.
Q21) In an EVALUATE statement, can I give a complex condition on a when clause?
A21) Yes.
Q22) What is a scope terminator? Give examples.
A22) Scope terminator is used to mark the end of a verb e.g. EVALUATE, END-EVALUATE; IF, END-IF.
Q23) How do you do in-line PERFORM? - GS
A23) PERFORM ... <UNTIL> ...
<sentences>
END-PERFORM
Q24) When would you use in-line perform?
A24) When the body of the perform will not be used in other paragraphs. If the body of the perform is a generic type of code
(used from various other places in the program), it would be better to put the code in a separate Para and use
PERFORM Para name rather than in-line perform.
Q25) What is the difference between CONTINUE & NEXT SENTENCE ?
A25) They appear to be similar, that is, the control goes to the next sentence in the paragraph. But, Next Sentence would
take the control to the sentence after it finds a full stop (.). Check out by writing the following code example, one if
sentence followed by 3 display statements (sorry they appear one line here because of formatting restrictions) If 1 > 0
then next sentence end if display 'line 1' display 'line 2'. display 'line 3'. *** Note- there is a dot (.) only at the end of
the last 2 statements, see the effect by replacing Next Sentence with Continue ***
Q26) What does EXIT do ?
A26) Does nothing ! If used, must be the only sentence within a paragraph.
Q27) Can I redefine an X(100) field with a field of X(200)?
A27) Yes. Redefines just causes both fields to start at the same location. For example:
01 WS-TOP PIC X(1)
01 WS-TOP-RED REDEFINES WS-TOP PIC X(2).
If you MOVE '12' to WS-TOP-RED,
DISPLAY WS-TOP will show 1 while
DISPLAY WS-TOP-RED will show 12.
A28) Can I redefine an X(200) field with a field of X(100) ?
Q31) Yes.
Q31) What do you do to resolve SOC-7 error? - GS
Q31) Basically you need to correcting the offending data. Many times the reason for SOC7 is an un-initialized numeric item.
Examine that possibility first. Many installations provide you a dump for run time abend’s ( it can be generated also
by calling some subroutines or OS services thru assembly language). These dumps provide the offset of the last
instruction at which the abend occurred. Examine the compilation output XREF listing to get the verb and the line
number of the source code at this offset. Then you can look at the source code to find the bug. To get capture the
runtime dumps, you will have to define some datasets (SYSABOUT etc ) in the JCL. If none of these are helpful, use
judgement and DISPLAY to localize the source of error. Some installation might have batch program debugging
tools. Use them.
Q32) How is sign stored in Packed Decimal fields and Zoned Decimal fields?
Q32) Packed Decimal fields: Sign is stored as a hex value in the last nibble (4 bits ) of the storage.
Zoned Decimal fields: As a default, sign is over punched with the numeric value stored in the last bite.
Q33) How is sign stored in a comp-3 field? - GS
Q33) It is stored in the last nibble. For example if your number is +100, it stores hex 0C in the last byte, hex 1C if
your number is 101, hex 2C if your number is 102, hex 1D if the number is -101, hex 2D if the number is –102 etc...
Q34) How is sign stored in a COMP field ? - GS
Q34) In the most significant bit. Bit is ON if -ve, OFF if +ve.
Q35) What is the difference between COMP & COMP-3 ?
Q35) COMP is a binary storage format while COMP-3 is packed decimal format.
Q36) What is COMP-1? COMP-2?
Q36) COMP-1 - Single precision floating point. Uses 4 bytes.
COMP-2 - Double precision floating point. Uses 8 bytes.
Q37) How do you define a variable of COMP-1? COMP-2?
Q37) No picture clause to be given. Example 01 WS-VAR USAGE COMP-1.
Q38) How many bytes does a S9(7) COMP-3 field occupy ?
Q38) Will take 4 bytes. Sign is stored as hex value in the last nibble. General formula is INT((n/2) + 1)), where n=7 in this
example.
Q39) How many bytes does a S9(7) SIGN TRAILING SEPARATE field occupy ?
Q39) Will occupy 8 bytes (one extra byte for sign).
Q40) How many bytes will a S9(8) COMP field occupy ?
Q40) 4 bytes.
Q41) What is the maximum value that can be stored in S9(8) COMP?
Q41) 99999999
Q42) What is COMP SYNC?
Q42) Causes the item to be aligned on natural boundaries. Can be SYNCHRONIZED LEFT or RIGHT. For binary data
items, the address resolution is faster if they are located at word boundaries in the memory. For example, on main
frame the memory word size is 4 bytes. This means that each word will start from an address divisible by 4. If my
first variable is x(3) and next one is s9(4) comp, then if you do not specify the SYNC clause, S9(4) COMP will start
from byte 3 ( assuming that it starts from 0 ). If you specify SYNC, then the binary data item will start from address 4.
You might see some wastage of memory, but the access to this computational field is faster.
Q43) What is the maximum size of a 01 level item in COBOL I? in COBOL II?
Q43) In COBOL II: 16777215
Q44) How do you reference the following file formats from COBOL programs:
Q44)
Fixed Block File - Use ORGANISATION IS SEQUENTIAL. Use RECORDING MODE IS F,
BLOCK CONTAINS 0 .
Fixed Unblocked - Use ORGANISATION IS SEQUENTIAL. Use RECORDING MODE IS F,
do not use BLOCK CONTAINS
Variable Block File - Use ORGANISATION IS SEQUENTIAL. Use RECORDING MODE IS V, BLOCK
CONTAINS 0. Do not code the 4 bytes for record length in FD ie JCL rec length will be max rec length in pgm + 4
Variable Unblocked - Use ORGANISATION IS SEQUENTIAL. Use RECORDING MODE IS V, do not use
BLOCK CONTAINS. Do not code 4 bytes for record length in FD ie JCL rec length will
be max rec length in pgm + 4.
ESDS VSAM file - Use ORGANISATION IS SEQUENTIAL.
KSDS VSAM file - Use ORGANISATION IS INDEXED, RECORD KEY IS, ALTERNATE RECORD KEY IS RRDS File - Use ORGANISATION IS RELATIVE, RELATIVE KEY IS
Printer File - Use ORGANISATION IS SEQUENTIAL. Use RECORDING MODE IS F, BLOCK
CONTAINS 0. (Use RECFM=FBA in JCL DCB).
Q45) What are different file OPEN modes available in COBOL?
Q45) Open for INPUT, OUTPUT, I-O, EXTEND.
Q46) What is the mode in which you will OPEN a file for writing? - GS
Q46) OUTPUT, EXTEND
Q47) In the JCL, how do you define the files referred to in a subroutine ?
Q47) Supply the DD cards just as you would for files referred to in the main program.
Q48) Can you REWRITE a record in an ESDS file? Can you DELETE a record from it?
Q48) Can rewrite (record length must be same), but not delete.
Q49) What is file status 92? - GS
Q49) Logic error. e.g., a file is opened for input and an attempt is made to write to it.
Q50) What is file status 39 ?
Q50) Mismatch in LRECL or BLOCKSIZE or RECFM between your COBOL pgm & the JCL (or the dataset label). You
will get file status 39 on an OPEN.
Q51) What is Static and Dynamic linking ?
Q51) In static linking, the called subroutine is link-edited into the calling program , while in dynamic linking, the subroutine
& the main program will exist as separate load modules. You choose static/dynamic linking by choosing either the
DYNAM or NODYNAM link edit option. (Even if you choose NODYNAM, a CALL identifier (as opposed to a
CALL literal), will translate to a DYNAMIC call).
A statically called subroutine will not be in its initial state the next time it is called unless you explicitly use INITIAL
or you do a CANCEL. A dynamically called routine will always be in its initial state.
Q52) What is AMODE(24), AMODE(31), RMODE(24) and RMODE(ANY)? (applicable to only MVS/ESA
Enterprise Server).
Q52) These are compile/link edit options. Basically AMODE stands for Addressing mode and RMODE for Residency
mode.
AMODE(24) - 24 bit addressing;
AMODE(31) - 31 bit addressing
AMODE(ANY) - Either 24 bit or 31 bit addressing depending on RMODE.
RMODE(24) - Resides in virtual storage below 16 Meg line. Use this for 31 bit programs that call 24 bit programs.
(OS/VS Cobol pgms use 24 bit addresses only).
RMODE(ANY) - Can reside above or below 16 Meg line.
Q53) What compiler option would you use for dynamic linking?
Q53) DYNAM.
Q54) What is SSRANGE, NOSSRANGE ?
Q54) These are compiler options with respect to subscript out of range checking. NOSSRANGE is the default and if chosen,
no run time error will be flagged if your index or subscript goes out of the permissible range.
Q55) How do you set a return code to the JCL from a COBOL program?
Q55) Move a value to RETURN-CODE register. RETURN-CODE should not be declared in your program.
Q56) How can you submit a job from COBOL programs?
Q56) Write JCL cards to a dataset with //xxxxxxx SYSOUT= (A,INTRDR) where 'A' is output class, and dataset should be
opened for output in the program. Define a 80 byte record layout for the file.
Q57) What are the differences between OS VS COBOL and VS COBOL II?
Q57) OS/VS Cobol pgms can only run in 24 bit addressing mode, VS Cobol II pgms can run either in 24 bit or 31 bit
addressing modes.
I. Report writer is supported only in OS/VS Cobol.
II. USAGE IS POINTER is supported only in VS COBOL II.
III. Reference modification e.g.: WS-VAR(1:2) is supported only in VS COBOL II.
IV. EVALUATE is supported only in VS COBOL II.
V. Scope terminators are supported only in VS COBOL II.
VI. OS/VS Cobol follows ANSI 74 stds while VS COBOL II follows ANSI 85 stds.
VII. Under CICS Calls between VS COBOL II programs are supported.
Q58) What are the steps you go through while creating a COBOL program executable?
Q58) DB2 precompiler (if embedded SQL used), CICS translator (if CICS pgm), Cobol compiler, Link editor. If DB2
program, create plan by binding the DBRMs.
Q59) Can you call an OS VS COBOL pgm from a VS COBOL II pgm ?
Q59) In non-CICS environment, it is possible. In CICS, this is not possible.
Q60) What are the differences between COBOL and COBOL II?
A60) There are at least five differences:
COBOL II supports structured programming by using in line Performs and explicit scope terminators, It introduces
new features (EVALUATE, SET. TO TRUE, CALL. BY CONTEXT, etc) It permits programs to be loaded and
addressed above the 16-megabyte line It does not support many old features (READY TRACE, REPORT-WRITER,
ISAM, Etc.), and It offers enhanced CICS support.
Q61) What is an explicit scope terminator?
A61) A scope terminator brackets its preceding verb, e.g. IF .. END-IF, so that all statements between the verb and its scope terminator are grouped together. Other common COBOL II verbs are READ, PERFORM, EVALUATE, SEARCH and STRING.
Q62) What is an in line PERFORM? When would you use it? Anything else to say about it?
A62) The PERFORM and END-PERFORM statements bracket all COBOL II statements between them. The COBOL equivalent is to PERFORM or PERFORM THRU a paragraph. In line PERFORMs work as long as there are no internal GO TOs, not even to an exit. The in line PERFORM for readability should not exceed a page length - often it will reference other PERFORM paragraphs.
Q63) What is the difference between NEXT SENTENCE and CONTINUE?
A63) NEXT SENTENCE gives control to the verb following the next period. CONTINUE gives control to the next verb after the explicit scope terminator. (This is not one of COBOL II's finer implementations). It's safest to use CONTINUE rather than NEXT SENTENCE in COBOL II.
Q64) What COBOL construct is the COBOL II EVALUATE meant to replace?
A64) EVALUATE can be used in place of the nested IF THEN ELSE statements.
Q65) What is the significance of 'above the line' and 'below the line'?
A65) Before IBM introduced MVS/XA architecture in the 1980's a program's virtual storage was limited to 16 megs. Programs compiled with a 24 bit mode can only address 16 Mb of space, as though they were kept under an imaginary storage line. With COBOL II a program compiled with a 31 bit mode can be 'above the 16 Mb line. (This 'below the line', 'above the line' imagery confuses most mainframe programmers, who tend to be a literal minded group.)
Q66) What was removed from COBOL in the COBOL II implementation?
A66) Partial list: REMARKS, NOMINAL KEY, PAGE-COUNTER, CURRENT-DAY, TIME-OF-DAY, STATE, FLOW, COUNT, EXAMINE, EXHIBIT, READY TRACE and RESET TRACE.
Q67) Explain call by context by comparing it to other calls.
A67) The parameters passed in a call by context are protected from modification by the called program. In a normal call they are able to be modified.
Q68) What is the linkage section?
A68) The linkage section is part of a called program that 'links' or maps to data items in the calling program's working storage. It is the part of the called program where these share items are defined.
Q69) What is the difference between a subscript and an index in a table definition?
A69) A subscript is a working storage data definition item, typically a PIC (999) where a value must be moved to the subscript and then incremented or decrements by ADD TO and SUBTRACT FROM statements. An index is a register item that exists outside the program's working storage. You SET an index to a value and SET it UP BY value and DOWN BY value.
Q70) If you were passing a table via linkage, which is preferable - a subscript or an index?
A70) Wake up - you haven't been paying attention! It's not possible to pass an index via linkage. The index is not part of the calling programs working storage. Those of us who've made this mistake, appreciate the lesson more than others.
Q71) Explain the difference between an internal and an external sort, the pros and cons, internal sort syntax etc.
A71) An external sort is not COBOL; it is performed through JCL and PGM=SORT. It is understandable without any code reference. An internal sort can use two different syntax’s: 1.) USING, GIVING sorts are comparable to external sorts with no extra file processing; 2) INPUT PROCEDURE, OUTPUT PROCEDURE sorts allow for data manipulation before and/or after the sort.
Q72) What is the difference between comp and comp-3 usage? Explain other COBOL usage’s.
A72) Comp is a binary usage, while comp-3 indicates packed decimal. The other common usage’s are binary and display. Display is the default.
Q73) When is a scope terminator mandatory?
A73) Scope terminators are mandatory for in-line PERFORMS and EVALUATE statements. For readability, it's recommended coding practice to always make scope terminators explicit.
Q74) In a COBOL II PERFORM statement, when is the conditional tested, before or after the perform execution?
A74) In COBOL II the optional clause WITH TEST BEFORE or WITH TEST AFTER can be added to all perform statements. By default the test is performed before the perform.
Q75) In an EVALUTE statement is the order of the WHEN clauses significant?
A75) Absolutely. Evaluation of the WHEN clauses proceeds from top to bottom and their sequence can determine results.
Q76) What is the default value(s) for an INITIALIZE and what keyword allows for an override of the default.
A76) INITIALIZE moves spaces to alphabetic fields and zeros to alphanumeric fields. The REPLACING option can be used to override these defaults.
Q77) What is SET TO TRUE all about, anyway?
A77) In COBOL II the 88 levels can be set rather than moving their associated values to the related data item. (Web note: This change is not one of COBOL II's better specifications.)
Q78) What is LENGTH in COBOL II?
A78) LENGTH acts like a special register to tell the length of a group or elementary item.
Q79) What is the difference between a binary search and a sequential search? What are the pertinent COBOL
commands?
A79) In a binary search the table element key values must be in ascending or descending sequence. The table is 'halved' to search for equal to, greater than or less than conditions until the element is found. In a sequential search the table is searched from top to bottom, so (ironically) the elements do not have to be in a specific sequence. The binary search is much faster for larger tables, while sequential works well with smaller ones. SEARCH ALL is used for binary searches; SEARCH for sequential.
Q80) What is the point of the REPLACING option of a copy statement?
A80) REPLACING allows for the same copy to be used more than once in the same code by changing the replace value.
Q81) What will happen if you code GO BACK instead of STOP RUN in a stand alone COBOL program i.e. a
program which is not calling any other program.
A81) The program will go in an infinite loop.
Q82) How can I tell if a module is being called DYNAMICALLY or STATICALLY?
A82) The ONLY way is to look at the output of the linkage editor (IEWL)or the load module itself. If the module is being called DYNAMICALLY then it will not exist in the main module, if it is being called STATICALLY then it will be seen in the load module. Calling a working storage variable, containing a program name, does not make a DYNAMIC call. This type of calling is known as IMPLICITE calling as the name of the module is implied by the contents of the working storage variable. Calling a program name literal (CALL
Q83) What is the difference between a DYNAMIC and STATIC call in COBOL.
A83) To correct an earlier answer: All called modules cannot run standalone if they require program variables passed to them via the LINKAGE section. DYNAMICally called modules are those that are not bound with the calling program at link edit time (IEWL for IBM) and so are loaded from the program library (joblib or steplib) associated with the job. For DYNAMIC calling of a module the DYNAM compiler option must be chosen, else the linkage editor will not generate an executable as it will expect u address resolution of all called modules. A STATICally called module is one that is bound with the calling module at link edit, and therefore becomes part of the executable load module.
Q84) How may divisions are there in JCL-COBOL?
A84) SIX
Q85) What is the purpose of Identification Division?
A85) Documentation.
Q86) What is the difference between PIC 9.99 and 9v99?
A86) PIC 9.99 is a FOUR-POSITION field that actually contains a decimal point where as PIC 9v99 is THREE- POSITION numeric field with implied or assumed decimal position.
Q87) what is Pic 9v99 Indicates?
A87) PICTURE 9v99 is a three position Numeric field with an implied or assumed decimal point after the first position; the v means an implied decimal point.
Q88) What guidelines should be followed to write a structured Cobol prg'm?
A88)
1) use 'evaluate' stmt for constructing cases.
2) use scope terminators for nesting.
3) use in line perform stmt for writing 'do ' constructions.
4) use test before and test after in the perform stmt for writing do-while constructions.
Q89) Read the following code. 01 ws-n pic 9(2) value zero. a-para move 5 to ws-n. perform b-para ws-n times. b-para.
move 10 to ws-n. how many times will b-para be executed ?
A89) 5 times only. it will not take the value 10 that is initialized in the loop.
Q90) What is the difference between SEARCH and SEARCH ALL? What is more efficient?
A90) SEARCH is a sequential search from the beginning of the table. SEARCH ALL is a binary search, continually dividing the table in two halves until a match is found. SEARCH ALL is more efficient for tables larger than 70 items.
Q91) What are some examples of command terminators?
A91) END-IF, END-EVALUATE
Q92) What care has to be taken to force program to execute above 16 Meg line?
A92) Make sure that link option is AMODE=31 and RMODE=ANY. Compile option should never have SIZE(MAX). BUFSIZE can be 2K, efficient enough.
Q93) How do you submit JCL via a Cobol program?
A93) Use a file //dd1 DD sysout=(*, intrdr)write your JCL to this file. Pl some on try this out.
Q94) How to execute a set of JCL statements from a COBOL program
A94) Using EXEC CICS SPOOL WRITE(var-name) END-EXEC command. var-name is a COBOL host structure containing JCL statements.
Q95) Give some advantages of REDEFINES clause.
A95)
1. You can REDEFINE a Variable from one PICTURE class to another PICTURE class by using the same memory
location.
2. By REDEFINES we can INITIALISE the variable in WORKING-STORAGE Section itself.
3. We can REDEFINE a Single Variable into so many sub variables. (This facility is very useful in solving Y2000
Problem.)
Q96) What is the difference between static call & Dynamic call
A96) In the case of Static call, the called program is a stand-alone program, it is an executable program. During run time we can call it in our called program. As about Dynamic call, the called program is not an executable program it can executed through the called program
Q97) What do you feel makes a good program?
A97) A program that follows a top down approach. It is also one that other programmers or users can follow logically and is easy to read and understand.
Q98) How do you code Cobol to access a parameter that has been defined in JCL? And do you code the PARM
parameter on the EXEC line in JCL?
A98)
1) using JCL with sysin. //sysin dd *here u code the parameters(value) to pass in to cobol program /* and in program
you use accept variable name(one accept will read one row)/.another way.
2) in jcl using parm statement ex: in exec statement parm='john','david' in cobol pgm u have to code linkage section in that for first value you code length variable and variable name say, abc pic x(4).it will take john inside to read next value u have to code another variable in the same way above mentioned.
Q99) Why do we code S9(4) comp. Inspite of knowing comp-3 will occupy less space.
A99) Here s9(4)comp is small integer ,so two words equal to 1 byte so totally it will occupy 2 bytes(4 words).here in s9(4) comp-3 as one word is equal to 1/2 byte.4 words equal to 2 bytes and sign will occupy 1/2 byte so totally it will occupy 3 bytes.
Q100) The maximum number of dimensions that an array can have in COBOL-85 is ----------- ?
A100) SEVEN in COBOL - 85 and THREE in COBOL - 84
Q101) How do you declare a host variable (in COBOL) for an attribute named Emp-Name of type VARCHAR(25) ?
A101)
01 EMP-GRP.
49 E-LEN PIC S9(4) COMP.
49 E-NAME PIC X(25).
Q102) What is Comm?
A102) COMM - HALF WORD BINARY
Q103) Differentiate COBOL and COBOL-II. (Most of our programs are written in COBOLII, so, it is good to know,
how, this is different from COBOL)
A103) The following features are available with VS COBOL II:
1. MVS/XA and MVS/ESA support The compiler and the object programs it produces can be run in either
24- or 31-bit addressing mode.
2. VM/XA and VM/ESA support The compiler and the object programs it produces can be run in either
24- or 31-bit addressing mode.
3. VSE/ESA support The compiler and the object programs it produces can be run under VSE/ESA.
Q104) What is PERFORM ? What is VARYING ? (More details about these clauses)
A104) The PERFORM statement is a PROCEDURE DIVISION statement which transfers control to one or more specified procedures and controls as specified the number of times the procedures are executed. After execution of the specified procedures is completed (i.e., for the appropriate number of times or until some specified condition is met), control is transferred to the next executable statement following the PERFORM statement. There are 5 types of PERFORM statements:
a) Basic PERFORM
b) PERFORM TIMES
c) PERFORM UNTIL
d) PERFORM VARYING
e) IN-LINE PERFORM
Q105) How many sections are there in data division?.
A105) SIX SECTIONS 1.FILE SECTION 2.WORKING-STORAGE SECTION 3. LOCAL-STORAGE SECTION 4.SCREEN SECTION 5.REPORT SECTION 6. LINKAGE SECTION
Q106) What is Redefines clause?
A106) Redefines clause is used to allow the same storage allocation to be referenced by different data names .
Q107) How many bytes does a s9(4)comp-3 field occupy?
A107) 3Bytes (formula : n/2 + 1))
Q108) What is the different between index and subscript?
A108) Subscript refers to the array of occurrence , where as Index represents an occurrence of a table element. An index can only modified using perform, search & set. Need to have an index for a table in order to use SEARCH and SEARCH All.
Q109) What is the difference between Structured COBOL Programming and Object Oriented COBOL
programming?
A109) Structured programming is a Logical way of programming, you divide the functionalities into modules and code logically. OOP is a Natural way of programming; you identify the objects first, and then write functions, procedures around the objects. Sorry, this may not be an adequate answer, but they are two different programming paradigms, which is difficult to put in a sentence or two.
Q110) What divisions, sections and paragraphs are mandatory for a COBOL program?
A110) IDENTIFICATION DIVISION and PROGRAM-ID paragraph are mandatory for a compilation error free COBOL
program.
Q111) Can JUSTIFIED be used for all the data types?
A111) No, it can be used only with alphabetic and alphanumeric data types.
Q112) What happens when we move a comp-3 field to an edited (say z (9). ZZ-)
A112) the editing characters r to be used with data items with usage clause as display which is the default. When u tries displaying a data item with usage as computational it does not give the desired display format because the data item is stored as packed decimal. So if u want this particular data item to be edited u have to move it into a data item whose usage is display and then have that particular data item edited in the format desired.
Q113) What will happen if you code GO BACK instead of STOP RUN in a stand-alone COBOL program i.e. a program which is not calling any other program ?
A113) Both give the same results when a program is not calling any other program. GO BACK will give the control to the system even though it is a single program.
Q114) what is the difference between external and global variables?
A114) Global variables are accessible only to the batch program whereas external variables can be referenced from any batch program residing in the same system library.
Q115) You are writing report program with 4 levels of totals: city, state, region and country. The codes being used can be the same over the different levels, meaning a city code of 01 can be in any number of states, and the same applies to state and region code so how do you do your checking for breaks and how do you do add to each level?
A115) Always compare on the highest-level first, because if you have a break at a highest level, each level beneath it must also break. Add to the lowest level for each record but add to the higher level only on a break.
Q116) What is difference between COBOL and VS COBOL II?.
A116) In using COBOL on PC we have only flat files and the programs can access only limited storage, whereas in VS COBOL II on M/F the programs can access up to 16MB or 2GB depending on the addressing and can use VSAM
files to make I/O operations faster.
Q117) Why occurs can not be used in 01 level ?
A117) Because, Occurs clause is there to repeat fields with same format, not the records.
Q118) What is report-item?
A118) A Report-Item Is A Field To Be Printed That Contains Edit Symbols
Q119) Difference between next and continue clause
A119) The difference between the next and continue verb is that in the continue verb it is used for a situation where there in no EOF condition that is the records are to be accessed again and again in an file, whereas in the next verb the indexed file is accessed sequentially, read next record command is used.
Q120) What is the Importance of GLOBAL clause According to new standards of COBOL
A120) When any data name, file-name, Record-name, condition name or Index defined in an Including Program can be referenced by a directly or indirectly in an included program, Provided the said name has been declared to be a global name by GLOBAL Format of Global Clause is01 data-1 pic 9(5) IS GLOBAL.
Q121) What is the Purpose of POINTER Phrase in STRING command
A121) The Purpose of POINTER phrase is to specify the leftmost position within receiving field where the first transferred character will be stored
Q122) How do we get current date from system with century?
A122) By using Intrinsic function, FUNCTION CURRENT-DATE
Q123) What is the maximum length of a field you can define using COMP-3?
A123) 10 Bytes (S9(18) COMP-3).
Q124) Why do we code s9 (4) comp? In spite of knowing comp-3 will occupy less space?
A124) Here s9(4)comp is small integer, so two words equal to 1 byte so totally it will occupy 2 bytes(4 words).here in s9(4) comp-3 as one word is equal to 1/2 byte.4 words equal to 2 bytes and sign will occupy 1/2 byte so totally it will occupy 3 bytes.
Q125) What is the LINKAGE SECTION used for?
A125) The linkage section is used to pass data from one program to another program or to pass data from a PROC to a program.
Q126) Describe the difference between subscripting and indexing ?
A126) Indexing uses binary displacement. Subscripts use the value of the occurrence.
1. What R 2 of the common forms of the EVALUATE STATEMENT ?
2. What does the initialize statement do ?
3. What is the reference modification.
4. Name some of the examples of COBOl 11?
5. What are VS COBOL 11 special features?
6. What are options have been removed in COBOL 11?
7. What is the file organization clause ?
8. What is a subscript ?
9. What is an index for tables?
10. What are the two search techniques ?
11. What is an in-line perform ?
12. What is CALL statement in COBOL?
13. When can the USING phrase be included in the call statement ?
14. In EBCDIC, how would the number 1234 be stored?
15. How would the number +1234 be stored if a PIC clause of PICTUREs9(4) comp-3 were used?
16. What is Alternate Index ? How is it different from regular index ?
Customer Information Control System(CICS)
IBM’s Customer Information Control System (CICS) is an on-line teleprocessing system developed by IBM. By providing a sophisticated control and service database/data communication system, the application developer can concentrate on fulfilling specific business needs rather than on communication and internal system details. CICS allows data to be transmitted from the terminal to the host computer, have the data processed, access files/databases, and then have data to be transmitted from the terminal to the host computer, have the data processed, access files/databases, and then have data transmitted back to the terminal. To accomplish that, CICS uses a telecommunication package such as VTAM or TCAM and various file access methods: VSAM, DL/1, DB2, etc.
The latest release CICS/ESA is Release 3.3.
Some of the new functionality includes:
1. Expanded features for the system programmer
2. Improved above the line storage utilization
3. New options for many CICS commands
4. Improved cross-platform communication facilities
Functionality
CICS provides the following support:
Data Communications
? An interface between the terminal and printers with CICS via a telecommunication access method (TCAM or VTAM).
? Multi Region Operation(MRO), through which more than one CICS region of a system can communicate
? Intersystem Communication (ISC), through which one CICS region of a system can communicate with other CICS regions in other systems
Application Programming
? Interfaces with programming languages such as COBOL and Assembler
? Command level translator
? An Execution Diagnostic Facility (EDF)
? A Command Interpreter
Data Handling
? An interface with database access methods such as DB2, DL/1, and VSAM
? An interface with error checking and reporting facilities
Terminology:
CICS has its own language. Some of the language abbreviations of CICS are:
SIT System Initialization Table
PCT Program Control Table
PPT Program Processing Table
TCT Terminal Control Table
FCT File Control Table
TCP Terminal Control Program
TCTUA Terminal Control Terminal User Area
DCT Destination Control Table
TDQ Transient Data Queue
EIP Execution Interface Program
FCP File Control Program
ICP Interval Control Program
KCT Task Control Program
PCP Program Control Program
SCP Storage Control Program
TCA Task Control Area
TCTTE Terminal Control Table Terminal Entry
TSQ Temporary Storage Queue
TWA Task Work Area
AID Attention Identifier
CWA Common Work Area
MRO Multi Region Operation
QID Queue Identifier
Q1) What are the six different types of argument values in COBOL that can be placed in various options of a CICS command?
A1)
? Data Value – EX (Literal 8 or 77 KEYLEN PIC S9(4) COMP VALUE 8.)
? Data Area – EX (01 RECORD-AREA.
05 FIELD1 PIC X(5). )
? Pointer-Ref – EX (05 POINTER-I PIC S9(8) COMP. )
? Name – EX (05 FILE-NAME PIC X(5) VALUE ‘FILEA’. )
? Label – Cobol paragraph name
? HHMMSS – EX (77 TIMEVAL PIC S9(7) COMP3. )
Q2) Kindly specify the PIC clause for the following
Any BLL Cell, Data type of Length Option field, HHMMSS type of data fields
A2) Any BLL Cell – S9(8) COMP
Data type of Length Option field – S9(4) COMP
HHMMSS type of data fields – S9(7) COMP3
Q3) Specify CICS transaction initiation process. (From the perspective of CICS control programs and control tables.)
A3) TCP places data in TIOA and corresponding entry into TCT.
KCP acquires the transaction identifier from TIOA and verifies if it is present in PCT.
SCP acquires Storage in Task Control Area (TCA), in which KCP prepares control data for the task.
KCP then loads the application programs mentioned in PCT by looking for it in PPT.
If resident – real storage memory location is not present in the PPT the control is passed to PCP that loads the application programs from the physical storage location address given in PPT. The control is then passed to the application program (LOAD module).
Q4) List the sequence of steps used to achieve “Modification in Skip Sequential Mode.”
A4)
I. READNEXT command
II. Issue the ENDBR command
III. Issue the READ command with UDTAE option.
IV. Manipulate the record (DELETE or REWRITE command)
V. Issue START command
VI. Issue two READNEXT commands (One for dummy skip)
VII. Go to step two.
Q5) Specify the requirements for Automatic Task Initiation. (Mention the control table, it’s entries and the corresponding Procedure division CICS command).
A5) DFHDCT TYPE=INTRA,
DESTID=MSGS,
TRANSID=MSW1,
TRIGLEV=1000
EXEC CICS WRITEQ TD
QUEUE(‘MSGS’),
FROM(DATA-AREA),
LENGTH(MSG_LEN)
END-EXEC.
Q6) What are the commands used to gain exclusive control over a resource (for Ex a Temporary storage queue.)?
A6) EXEC CICS ENQ EXEC CICS DEQ
RESOURCE(QID) RESOURCE(QID)
END-EXEC END-EXEC
Q7) What is the EIB parameter and the CICS command used to implement Pseudo-Conversational technique using single PCT – Single PPT entry?
A7) EIBCALEN – To check if COMMAREA has been passed in terurn command.
EXEC CICS RETURN
TRANSID(data-name)
COMMAREA(data-area)
LENGTH(data-value)
END-EXEC
Q8) Mention the 5 fields available in the symbolic map for every ‘NAMED’ field in the DFHMDI macro? Give a brief description of these fields (Not exceeding a line).
A8) FIELD+L - Return the length of text entered (or for dymanic cursor positioing)
FIELD+F - Returns X(80) if data entered but erased.
FIELD+A - Used for attributes reading and setting
FIELD+I - Used for reading the text entered while receiving the map.
FIELD+O - Used for sending information on to the MAP.
Q9) What are the two ways of breaking a CPU bound process to allow other tasks to gain access to CPU.
A9) EXEC CICS DELAY EXEC CICS DELAY
INTERVAL(hhmmss) TIME(hhmmss)
END-EXEC END-EXEC
POST and WAIT commands also achieve the same result.
Q10) How do you initiate another transaction? The transaction initiated should be in a position to retrieve
information pertaining to which transaction has initiated it and from which terminal. (Code the required CICS
commands)
A10) EXEC CICS START
INTERVAL(hhmmss)/TIME(hhmmss)
TRANSID(‘TRAN’)
TERMID(‘TRM1)
FROM(data-area)
LENGTH(data-value)
RTRANSID(EIBTRNID)
RTERMID(EIBTRMID)
END-EXEC
EXEC CICS RETRIEVE
INTO(data-area)
LENGTH(data-value)
RTRANSID(data-name)
RTERMID(data-name)
END-EXEC
Q11) Mention the option (along with argument type) used in a CICS command to retrieve the response code after
execution of the command.
A11) RESP( S9(8) COM.)
Q12) What’s the CICS command used to access current date and time?
A12) ASKTIME.
Q13) Into what fields will the date and time values be moved after execution of the above command?
A13) EIBDATE & EIBTIME.
Q14) How do you terminate an already issued DELAY command?
A14) EXEC CICS CANCEL
REQID(id)
END-EXEC
Q15) How do you dynamically set the CURSOR position to a specific field?
A15) MOVE –1 to FIELD+L field. Mention CURSOR option in the SEND command.
Q16) Which option of the PCT entry is used to specify the PF key to be pressed for initiating a transaction?
A16) TASKREQ=PF1
Q17) Specify the CICS command used to read a VSAM record starting with prefix “F”. Code all the relevant options.
A17) EXEC CICS READ
DATASET(‘FILENAME’)
INTO(data-area)
RIDFLD(data-area)
KEYLENGTH(1)
GENERIC
LENGTH(WK-LEN)
END-EXEC.
Q18) Mention the option used in the CICS READ command to gain accessibility directly to the file I/O area. (Assume
COBOL-II).
A18) SET(ADDRESS OF LINKAGE-AREA).
Q19) Which command is used to release a record on which exclusive control is gained?
A19) EXEC CICS UNLOCK END-EXEC.
Q20) How do you establish a starting position in a browse operation?
A20) EXEC CICS STARTBR---------- END-EXEC.
Q21) What is the option specified in the read operation to gain multiple concurrent operations on the same dataset?
A21) REQID(value).
Q22) What is the CICS command that gives the length of TWA area?
A22) EXEC CICS ASSIGN
TWALENG(data-value)
END-EXEC.
Q23) What are the attribute values of Skipper and Stopper fields?
A23) ASKIP, PROT.
Q24) How do you set the MDT option to ‘ON’ status, even if data is not entered?
A24) Mention FSET option in DFHMDF or set it dynamically in the program using FIELD+A attribute field.
Q25) What option is specified in the SEND command to send only the unnamed fields on to the screen?
A25) MAPONLY_______________.
Q26) Which CICS service transaction is used to gain accessibility to CICS control tables? Mention the one that has
the highest priority.
A26) CEDA
Q27) What is the most common way of building queue-id of a TSQ? (Name the constituents of the Queue ID).
A27) TERMID+TRANSACTION-ID.
Q28) Into which table is the terminal id registered?
A28) TCT.
Q29) How and where is the TWA size set? .
A29) TWASIZE=300 in PCT table.
Q30) Which transient data queue supports ATI?
A30) INTRA-PARTITION Data queue.
Q31) Code the related portions of CICS/COBOL-I programs to gain addressability to TWA area assigned to a
particular task. Assume that the size of TWA area is 300 bytes. What are the advantages if COBOL-II is used
in the place of COBOL? Code the above requirement in COBOL-II.
A31)
COBOL- II PROGRAM
LINKAGE SECTION.
01 PARMLIST.
02 FILLER PIC S9(8) COMP.
02 TWA-PTR S(98) COMP.
01 TWA-DATA-LAYOUT.
02 DATA-AREA PIC X(300).
PROCEDURE DIVISION.
……….
EXEC CICS ADDRESS
TWA(TWA-PTR)
END-EXEC
SERVISE RELOAD TWA-DATA-LAYOUT.
COBOL- II PROGRAM
LINKAGE SECTION.
01 TWA-DATA-LAYOUT.
05 DATA-AREA PIC X(300).
PROCEDURE DIVISION.
……….
EXEC CICS ADDRESS
TWA(ADDRESS OF TWA-DATA-LAYOUT)
END-EXEC
………
Q32) Code a program meeting the following requirements.
‘EMPS’ is a transaction used to return information pertaining to an employee when the “EMPID” is entered on the screen. The information pertaining to an employee is present in a VSAM/KSDS dataset registered in FCT as “EMPINFOR”. The map and the working storage section of the emp-info are given for reference. If the employee id is found the information has to be sent to the screen (Status field) with the message “Emp Id: XXX found.”. If the emp-id key is not found then status field should array the message “Key not found.” and the ‘EMP ID” field should be set to bright. If the Exit option is set to “Y” then the task has to terminated. Use pseudo-conversation technique three (Single PCT and PPT).
EMPLOYEE INFORMATION FORM
EMP ID : XXX
EMP NAME : @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
EMP DESIG : @@@@@ SEX : @
DEPARTMENT : @@@@@@@@@@
SALARY : $$$$$$$
STATUS : @@@@@@@@@@@@@@@@@@@@
EXIT : X
X – Input Field
@ - Output field (Alphanumeric)
$ - Output field (Numeric)
Mapname – EMPFORM
Mapsetname - EMPFORM
Label given to various ‘named’ fields on the DFHMDF macro while defining the map shown above. EMPID, EMPNAME, EMPDESIG, DEPART, SEX, SALARY, STATUS and EXITINP.
Structure of the VSAM/KSDS file.
Working-Storage Section.
01 EMP-IOAREA.
05 EMP-REC.
10 EMP-KEY PIC XXX.
10 EMP-NAME PIC X(32).
10 EMP-SEX PIC X.
10 EMP-DEPT PIC X(10)
10 EMP-DESIG PIC X(5).
10 EMP-SAL PIC 9(7).
A32) COBOL-II PROGRAM.
WORKING-STORAGE SECTION.
77 LENGTH-OF-AREA PIC S9(4) COMP.
77 WS-RCODE PIC S9(8) COMP.
01 STATUS.
02 NORMAL.
05 FILLER PIC X(8) VALUE ‘EMP ID: ‘.
05 EMP-ID PIC X(3).
05 FILLER PIC X(6) VALUE ‘FOUND’.
02 ABNORMAL REDEFINES NORMAL.
05 ABMSG PIC X(17).
01 EMP-IOAREA.
05 EMP-REC.
10 EMP-KEY PIC XXX.
10 EMP-NAME PIC X(32).
10 EMP-SEX PIC X.
10 EMP-DEPT PIC X(10)
10 EMP-DESIG PIC X(5).
10 EMP-SAL PIC 9(7).
LINKAGE SECTION.
01 DFHCOMMAREA.
05 INPVAL PIC X(3).
PROCEDURE DIVISION.
………..
IF EIBCALEN=0
EXEC CICS SEND
MAP(‘EMPFORM’)
MAPSET(‘EMPFORM’)
ERASE
END-EXEC.
MOVE 3 TO LENGTH-OF-AREA
EXEC CICS RETURN
TRANSID(‘EMPS’)
COMMAREA(‘SEC’)
LENGTH(DATA-VALUE)
END-EXEC.
ELSE IF INPVAL = ’SEC’
EXEC CICS RECEIVE
MAP(‘EMPFORM’)
MAPSET(‘EMPFORM’)
END-EXEC.
EXEC CICS READ
DATASET(‘EMPINFOR’)
INTO(EMP-IOAREA)
RIDFLD(EMPIDI)
LENGTH(LENGTH-OF-AREA)
RESP(WS-RCODE)
END-EXEC.
IF WS-RCODE NOT = DFHRESP(NORMAL)
MOVE ‘KEY NOT FOUND’ TO ABMSG’
MOVE DFHBMBRY TO EMPIDA
ELSE
MOVE EMP-NAME TO EMPNAMEO
MOVE EMP-SEX TO SEXO
MOVE EMP-DESIG TO EMPDESIGO
MOVE EMP-SAL TO SALARY
MOVE EMP-DEPT TO DEPARTO
MOVE EMP-KEY TO EMP-ID
MOVE STATUS TO STATUSO.
EXEC CICS SEND
MAP(‘EMPFORM’)
MAPSET(‘EMPFORM’)
ERASE
END-EXEC.
MOVE 3 TO LENGTH-OF-AREA
EXEC CICS RETURN
TRANSID(‘EMPS’)
COMMAREA(‘SEC’)
LENGTH(LENGTH-OF-AREA)
END-EXEC.
EXEC CICS RETURN
END-EXEC.
ELSE IF (EXITINPI NOT = ‘Y’)
EXEC CICS RETURN
END-EXEC.
The following are most frequently asked questions (FAQS):
Q33) What does “Pseudo Conversational” mean?
A33) The programming technique in which the task will not wait for the end-user replies on the terminal. Terminating the
task every time the application needs a response from the user and specifying the next transaction to be started when
the end user press any attention key (Enter, PF1 through PF24, PA1,PA2 and Clear) is pseudo-conversational
processing.
Q34) Explain the means of supporting pseudo conversation programming. (E.g. Storing and restoring of states,
control flow, error handling)
A34) When we send a map using SEND MAP command. Immediately we release the program by using EXEC
CICS RETURN command. In this command we mention the TRANSACTION ID which is to be executed
after receiving the map. In this command we also specify the data that should be stored in
COMMUNICATION AREA for later use. When this command is executed the corresponding program is
released from the memory. After receiving the response from the terminal the program is again loaded and this
time the data which we stored in communication area will be copied into the working storage section. And
the map will be received with RECEIVE MAP command.
The variable EIBCALEN in EIB holds the length of communication area. In procedure division we checks the value of EIBCALEN If it is zero, we first send the map followed by RETURN command. Otherwise, that is if EIBCALEN is not zero, we know that this transaction is not running first time and we receive the map by using RECEIVE MAP command.
Q35) What is the function of the CICS translator?
A35) The CICS translator converts the EXEC CICS commands into call statements for a specific programming language. There are CICS translators for Assembler, COBOL, and PL/1.
Q36) How can you start a CICS transaction other than by keying the Transaction ID at the terminal?
A36) By coding an EXEC CICS START in the application program
1. By coding the trans id and a trigger level on the DCT table
2. By coding the trans id in the EXEC CICS RETURN command
3. By associating an attention key with the Program Control Table
4. By embedding the TRANSID in the first four positions of a screen sent to the terminal.
5. By using the Program List Table
Q37) What is the purpose of the Program List Table?
A37) The Program List Table records the set of applications programs that will be executed automatically at CICS start-up
time.
Q38) What are the differences between and EXEC CICS XCTL and an EXEC CICS START command?
A38) The XCTL command transfer control to another application (having the same Transaction ID), while the START command initiates a new transaction ID (therefore a new task number). The XCTL continues task on the same terminal. START can initiate a task on another terminal.
Q39) What are the differences between an EXEC CICS XCTL and an EXEC CICS LINK command.
A39) The XCTL command transfer control to an application program at the same logical level (do not expect to control back), while the LINK command passes control to an application program at the next logical level and expects control back.
Q40) What happens to resources supplied to a transaction when an XCTL command is executed?
A40) With an XCTL, the working storage and the procedure division of the program issuing the XCTL are released. The I/O areas, the GETMAIN areas, and the chained Linkage Section areas (Commarea from a higher level) remain. All existing locks and queues also remain in effect. With a LINK, however, program storage is also saved, since the transaction expects to return and use it again.
Q41) What CICS command do you need to obtain the user logon-id?
A41) You must code EXEC CICS ASSIGN with the OPERID option.
Q42) What is a resident program?
A42) A program or map loaded into the CICS nucleus so that it is kept permanently in main storage and not deleted when CICS goes “Short On Storage”.
Q43) What is EIB. How it can be used?
A43) CICS automatically provides some system-related information to each task in a form of EXEC Interface Block (EIB), which is unique to the CICS command level. We can use all the fields of EIB in our application programs right away.
Q44) What is some of the information available in the EIB area?
A44)
I. The cursor position in the map
II. Transaction ID
III. Terminal ID
IV. Task Number
V. Length of communication area
VI. Current date and time
VII. Attention identifier
Q45) What information can be obtained from the EIBRCODE?
A45) The EIBRCODE tells the application program if the last CICS command was executed successfully and, if not, why not.
Q46) What is the effect of including the TRANSID in the EXEC CICS RETURN command?
A46) The next time the end user presses an attention key, CICS will start the transaction specified in the TRANSID option.
Q47) Explain how to handle exceptional conditions in CICS.
A47) An abnormal situation during execution of a CICS command is called an exceptional condition".
There are various ways to handle these exception conditions:
1. Handle Condition Command: It is used to transfer control to the procedure label specified if the
exceptional condition specified occurs.
2. Ignore Condition Command: It causes no action to be taken if the condition specified occurs in
the program. That is control will be returned to the next instruction following the command which
encountered the exceptional condition.
3. No Handle Option: This option can be specified in any CICS command and it will cause no
action to be taken for any exceptional condition occurring during execution of this command.
4. RESP Option: This option can be specified in any CICS command. If the RESP option is
specified in a command, CICS places a response code at a completion of the command. The
application program can check this code, then proceed to the next processing.
Handle condition:
Invalid handling of CICS error condition within the program causing the looping. Here is one example, most program have EXEC CICS HANDLE CONDTION ERROR(label) or EXEC CICS HANDLE ABEND LABEL(label) to trap any error condition or abend. This type of coding is usually acceptable if they handle the error / abend correctly in their handling paragraph. However, the program often cause another error or abend within the handling routine. In that case, looping or sos will occur. I strong recommend that the following statement should be included in their ERROR handling paragraph.
EXEC CICS HANDLE CONDTION ERROR END-EXEC. It means that from now on, CICS will handle all the errors and will not go back to error handling routine .For HANDLE ABEND, code EXEC CICS HANDLE ABEND CANCEL instead. Please check the application program reference manual for further explanation of these two commands. Besides, not only these two HANDLE will cause the program, other type of error handle might cause loop too. So code the HANDLE command carefully. It is a good program practice to deactivate the error handling by EXEC CICS HANDLE CONDITION condition END-EXEC. Once you know that the program won't need it anymore.
Q48) What is the function of the EXEC CICS HANDLE CONDITION command?
A48) To specify the paragraph or program label to which control is to be passed if the “handle condition” occurs.
Q49) How many conditions can you include in a single HANDLE CONDITION command?
A49) No more than 16 in a single handle condition. If you need more, then you must code another HANDLE CONDITION
command.
Q50) What is the EXEC CICS HANDLE ABEND?
A50) It allows the establishing of an exit so cleanup processing can be done in the event of abnormal task termination.
Q51) What is the difference between EXEC CICS HANDLE CONDTION and an EXEC CICS IGNORE command?
A51) A HANDLE CONDITION command creates a “go-to” environment. An IGNORE command does not create a go-to environment; instead, it gives control back to the next sequential instruction following the command causing the condition. They are opposites.
Q52) What happens when a CICS command contains the NOHANDLE option?
A52) No action is going to be taken for any exceptional conditional occurring during the execution of this command. The abnormal condition that occurred will be ignored even if an EXEC CICS HANDLE condition exist. It has the same effect as the EXEC CICS IGNORE condition except that it will not cancel the previous HANDLE CONDITION for any other command.
Q53) When a task suspends all the handle conditions via the PUSH command, how does the task reactivate all the
handle conditions?
A53) By coding an EXEC CICS POP HANDLE command.
Q54) Explain re-entrancy as applies to CICS.
A54) Reentrant program is a program which does not modify itself so that it can reenter to itself and continue processing after an interruption by the operating system which, during the interruption, executes other OS tasks including OS tasks of the same program. It is also called a "reenterable" program or"serially reusable" program.
A quasi-reentrant program is a reentrant program under the CICS environment. That is, the quasi-reentrant program is a CICS program which does not modify itself. That way it can reenter to itself and continue processing after an interruption by CICS which, during the interruption, executes other tasks including CICS tasks of the same program. In order to maintain the quasi-reentrancy, a CICS application program must follow the following convention:
Constants in Working Storage: The quasi-reentrant program defines only constants in its ordinary data area (e.g. working Storage Section ). These constants will never be modified and shared by the tasks.
Variable in Dynamic Working Storage: The quasi reentrant program acquires a unique storage area (
called Dynamic Working Storage --DWS) dynamically for each task by issuing the CICS macro
equivalent GETMAIN. All variables will be placed in this DWS for each task. All counters would have to be initialized after the DWS has been acquired.
Restriction on Program Alteration: The program must not alter the program itself. If it alters a CICS macro or command, it must restore the alteration before the subsequent CICS macro or command.
Q55) What are the CICS commands available for program control?
A55) The following commands are available for the Program Control services:
1. LINK: To pass control to another program at the lower level, expecting to be returned.
2. XCTL: To pass control to another program at the same level, not expecting to be returned.
3. RETURN: To return to the next higher-level program or CICS.
4. LOAD: To load a program.
5. RELEASE: To release a program.
Q56) How is addressability achieved to the data outside programs working-storage.?
A56) The Base Locator for Linkage ( BLL ) is an addressing convention used to address storage outside the Working Storage Section of an application program. If BLL is used for the input commands (e.g.: READ, RECEIVE), it will improve the performance, since the program would be accessing directly the input buffer outside of the program. In order to work as intended, the program must construct BLL based on the following convention:
1). The parameter list must be defined by means